Support

Quantum

Scalar 1000

  • Scalar 1000图书馆

手术

Cartridge Change:

每小时350峰值旋转

Drive Interface:

LTO: SCSI-2 LVD; AIT: SCSI-2 LVD or HVD; SDLT or DLT: SCSI-2 LVD or HVD; integrated FC interface optional for all

图书馆界面:

SCSI-2 HVD Integrated FC interface optional

Indicators:

Password-protected keypad with LCD menu display

Drive: Status LED and Eject Buttons
图书馆界面: SCSI-2 Differential
SCSI连接: 68-pin micro-D

配置:

Auto-discovery and auto-calibration for installed or added components (modules, drives, magazines, tapes, etc.)

Physical

System

HxWxD

Weight

Control Module

29.5"W x 47"D x 71"H
74.9cm x 119.4cm x 180.3cm

1052 lbs
478kg

Expansion Module

29.5"W x 47"D x 71"H
74.9cm x 119.4cm x 180.3cm

817 lbs (
371kg

环境的

电气:

115/230 VAC, 1.6kVa

Temperature:

16 - 35°C操作

高度: 10,000 feet

湿度:

15 to 75% non-condensing operating

Storage Networking Support<

Platform/Connectivity:

SNC 5100 (2 Gb Fibre Channel) or SNC 3000 (1 Gb Fibre Channel)

Management Services:

端到端路径验证,错误恢复,驱动性能优化,SAN安全(标量防火墙管理器),无务备份(Data Mover模块)

Reliability

图书馆MCBF:

Greater than 1,000,000 cartridge changes

Drive MTBF: Greater than 200,000 power-on hours

MTTR:

Less than 30 minutes

Power:

诊断:

Built-In-Test (BIT), store/recall past events, “fault isolation” assistance, self-initiating configuration and calibration routines; SNMP traps reported through RMU or Scalar DLC; email alert; SAN device health checks

Module Upgrade: Any storage module can be added in two hours; customer-installable drive upgrades
Tape Shelf Life: 最小30年(20°C,40%RH)

Drive Hard Error Rate

Less than 1 in 10^17 bits

合规和认证

Safety:

UL-1950 ITE, CSA950, EN 60950

Emissions Standards:

A CISPR 22/EN 55022 Class A, EN 61000-3-2 & -3

免疫标准:

EN 55024

国际认证:

CE, FCC, ICES, BSMI, UL, cUL, TUV/GS

  • 此产品没有可下载的驱动程序。
Note:Quantum Tape Drive drivers can be found on the individual drivedownload page.
  • There are no diagnostic downloads for this product.

Product Updates

Product Use Guides

Planning and Installation Guides

Safety Guide

Quantum Knowledge Base Information